Steven, yes it does, but is not accurate. And what is the purpose of dipping just to get an inaccurate reading? I also use the FUELHAWK C-152 dip stick tube but to get an accurate reading it needs to be modified. Do this the next time you fuel up. Dip your tanks first to see how much fuel remains. Let's say they read 5 gallons each so you should have 10 gal usable remaining. If that is correct you would need 12.5 gal to top off. Top it off and see what it takes. I will make a bet it is off by about 2.5 gal. There are ways to correct that but try this experiment first. Also a little tip, if when you dip your tanks and the reading does not hold steady, first moisten your finger that you use on top of the tube.....................Jay
