Previous Thread
Next Thread
Print Thread
#318884 07/08/11 06:42 PM
Joined: Jul 2008
Posts: 144
Member/100+posts
Member/100+posts
Joined: Jul 2008
Posts: 144
I have my Kollsman altimeter for sale. It is legal for VFR but not IFR as it is 60 feet off. It can be had for 300.00 OBO. It was overhauled in 2005. My plane is IFR thus cannot be certified as IFR with this altimeter. I have already replaced the altimeter to avoid down time and my plane be IFR certified.


Jim Kent
Joined: Dec 2003
Posts: 2,134
Member/1500+posts
Member/1500+posts
Joined: Dec 2003
Posts: 2,134
Why couldn't you just have had it adjusted? If it's a constant 60 foot error, it could have easily been adjusted in less time than it took to write this post.


Tim
'76 C-150M, San Antonio
Joined: Jul 2008
Posts: 144
Member/100+posts
Member/100+posts
Joined: Jul 2008
Posts: 144
The Mechanic doing the IFR recert would not certify it for IFR. My friend at an aero club had an overhauled one from former 152s that are no more and gave me the overhauled one at no charge. Being the plane is used for IFR training I want the best instruments in the plane. Old one may need more than just an adjustment.


Jim Kent
Joined: Dec 2003
Posts: 2,134
Member/1500+posts
Member/1500+posts
Joined: Dec 2003
Posts: 2,134
Originally Posted by James_Kent
The Mechanic doing the IFR recert would not certify it for IFR. My friend at an aero club had an overhauled one from former 152s that are no more and gave me the overhauled one at no charge. Being the plane is used for IFR training I want the best instruments in the plane. Old one may need more than just an adjustment.


I don't know where your mechanic is getting this from. We've always used +/- 75 feet as the cutoff between airworthy or not (ref. AIM 7-2-3). How long ago was the 91.411 inspection done? What was the error listed compared to the reference altimeter? I still say a 60 foot difference from field elevation is certainly acceptable for VFR and legal for IFR but if you wanted it adjusted, it would be legal for an A&P to adjust it (this is not the same as calibrating it which only an instrument repairman or station could legally do). It's your money and if you want to buy a new instrument knock yourself out.

PS. Or was your "mechanic" an avionics tech doing the 91.411/Part 43 Appendix E check and he couldn't calibrate the altimeter to within tolerance? If that's the case I suspect the plumbing might be a likely suspect which would require a leak test to confirm. I don't like replacing instruments unless the instrument is truly defective.

Last edited by 150flivver; 07/10/11 02:58 AM.

Tim
'76 C-150M, San Antonio
Joined: Jul 2008
Posts: 144
Member/100+posts
Member/100+posts
Joined: Jul 2008
Posts: 144
Once the FREE overhauled altimeter was installed, the IFR recertification showed a perfect reading at all levels. NO PLUMBING PROBLEM.The plane is in PERFECT compliance. My money not wasted. The IFR recertification was due. 250.00 for that and the xponder check and new gyro filters. I don't half step when it comes to MY plane...


Jim Kent

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 8.0.0