Previous Thread
Next Thread
Print Thread
Joined: Oct 2009
Posts: 24
M
Member
Member
M Offline
Joined: Oct 2009
Posts: 24
1959 Cessna 150 Restoration Project. Complete aircraft minus engine and propeller. Airframe time approx. 3750 hours TT. Wings and tail removed for storage and restoration. Have started preparing control surfaces for painting. Stored inside most of its life. Very straight, no hail damage. Corrosion free. Would be an ideal candidate for a tailwheel conversion. I do have 140 gear legs and rebuildable 140 gearboxes available. The plane hasn't flown for quite a few years. I have all the logs except the original log book. I'd have to look but I think the logs I have go back to the late 60s or early 70s. I think the last annual was in the 80s. The photo with the engine and prop on was taken about 2 1/2 years ago, just before they were removed to put on another aircraft by the individual whom I bought the aircraft from. It has been stored inside most of its life. I have too many other things that take up my time so, I've decided to sell the plane. If there are any other photos or information you need, just let me know. I do have the cowling even though it is not show in the photos. Other interests are taking more of my time is the reason for selling. Price $5500 FIRM, Located Fort Worth, TX.

Mike
PM or email for more information.
Attachments
270963-c-15010.jpg (112.82 KB, 151 downloads)
DSCF0311a.JPG (226.12 KB, 119 downloads)
DSCF0312.JPG (1.06 MB, 97 downloads)
DSCF0313.JPG (1.07 MB, 74 downloads)
DSCF0314.JPG (1.17 MB, 71 downloads)
DSCF0315.JPG (1.18 MB, 68 downloads)
DSCF0316.JPG (1.21 MB, 69 downloads)
DSCF0333.JPG (1.2 MB, 89 downloads)

Joined: Oct 2009
Posts: 24
M
Member
Member
M Offline
Joined: Oct 2009
Posts: 24
Still available. $5500 / OBO.

I also have a set of Cessna 140 gear legs and a set of rebuildable 140 gearboxes available for this as I was planning on converting it to a tailwheel plane.

Mike

Joined: Oct 2009
Posts: 24
M
Member
Member
M Offline
Joined: Oct 2009
Posts: 24
Price reduced to $4750 ! I found another plane that I am interested in so here is an opportunity for someone to get a complete project minus engine and prop. If interested I can send more photos. Sorry about the picture sizes here.

Mike


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 8.0.0