I have a set of flat spring landing gear for sale from a 1964 Cessna 150D. $150 for the set, but you pay for shipping and must take both.

I'll take them and I'll pay shipping if they have the right bolt pattern for the axles. Do they have the 3/8" bolt holes for the lower 2 holes and the 5/16" bolt holes for the upper holes?

If all of the holes are the same diameter then I can't use them.

Mike Sibley

907-398-6778

The Newfangs have first dibs. I've got a pile of gear legs and will look through for another set but think the rest are for bigger aircraft.

I came up with a second set of gear legs I'd forgotten about (insert "might be a redneck if" joke here). Same price.

Okay, I found one gear leg for you. It's the right side with the correct bolt pattern for you. How about $80 for the leg or $100 for the leg with the matching axle, shims, and brake caliper mount?

My phone is 520-370-2498

Kendel

I'm looking for a set of flat springs for my 150H part no's 0441186-1 & 0441186-2

Have a few inquiries out to some salvage companies but if you come across anything I would appreciate your help.

I'm down under in good old Kiwi land, New Zealand and not much in the way of spares here I'm afraid.

Cheers

I have part numbers 0441163-9 and 0441163-10. I don't know if those supersede or are equivalent numbers for you.

Thanks but they were for the earlier models from 1959-1965 up to "E" models

I need the next series from 1966-1969 models "F - J " models.

Still looking

Cheers

I believe Mike Sibley (a member here) collects those. He has them re-arched and re-tempered for tailwheel conversions, but might be able to put you onto a stock set.

Do you have his details or are yo able to find out for me?
That would be great.

Cheers

Mike's email is on his user profile

http://www.cessna150152.com/forum/ubbthreads.php?ubb=showprofile&User=3467

Here's a picture of Mike's landing gear in action with him at the controls. You can see the reason for the mod. The reason I think he uses the same model numbers is that he runs the beefy steel axle to support those monstrous tires and it's only on the later bolt pattern... I think.

[Linked Image]

Mike

I'm looking for a set of flat springs for my 150H part no's 0441186-1 & 0441186-2

Have a few inquiries out to some salvage companies but if you come across anything I would appreciate your help.

I'm down under in good old Kiwi land, New Zealand and not much in the way of spares here I'm afraid.

Kedel McCarley suggested contacting you.

Unfortunately grounded until they are replaced http://www.cessna150152.com/forum/images/icons/default/frown.gif

Cheers

Do you have a set of the tube gear legs for a C150M?

Thanks!